![]() ![]() If the new waste toner pack is not detected try to clean the contacts on the waste toner pack as well as where they touch inside the machine. ![]() The replacement waste toner box is automatically detected by the machine. You will hear a loud click when the top cover is closed firmly. ![]() Reinstall the drum unit and toner cartridge assemblies into the machine by sliding them into the correct slot by matching the toner cartridge color to the same color label on the machine.ġ0. The waste toner box does not 'snap' in place. Unpack the new waste toner box and install the waste toner box in the machine. Hold the green handle of the waste toner box and remove the waste toner box from the machine.ħ. Twist the clip and remove from the machine (this clip may be discarded).Ħ. The waste toner box may be secured by an orange packing clip. If the waste toner box is installed, continue to the next step.ĥ. If you do not have a waste toner box, you will have to purchase and install one in order for the machine to operate. If you only see the metal bottom of the machine, then the waste toner box is not installed. The waste toner is black with a foam roller and a green handle on it. Once the belt unit is removed from the machine, the waste toner box should be visible. Hold the green handle of the belt unit and lift the belt unit up, then pull it out.Ĥ. Repeat this step for all 4 drum units and toner cartridge assemblies.ģ. Place the drum unit and toner cartridges assemblies on a piece of disposable paper or cloth to avoid spilling and scattering the toner. Each drum unit and toner assembly can be removed by grasping the center of the drum and toner assembly and pulling it straight up. Take out the drum unit and toner cartridge assembly. The top cover is completely open when the cover locks in place and does not require support from you.Ģ. Lift open the top cover using the indented handle in the center until you hear a click.įailure to completely open the top cover when removing and installing consumables may cause severe damage to the machine. If you find that your retailer does not carry the specific supplies and accessories you are looking for, please visit our website at ġ. This maintenance can be performed by the end user. When you see this message, you must replace the waste toner box, part number WT220CL. The message 'Replace WT Box' will appear on the LCD of the Brother machine when the waste toner box is full and needs to be replaced. View All Brother Care Program Eligible Products.View All Refurbished - Sewing & Crafting.View All Refurbished - Fax Machines & Scanners. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |